missing translation for 'onlineSavingsMsg'
Learn More
  1. Home
  2. Products
  3. Evaporators
  4. Centrifugal Evaporators
  5. 10765614

Labconco Refrigerated CentriVap Benchtop Vacuum Concentrator with Glass Lid
BIOPHARMA

Product Code. 10765614 Shop All Labconco Corporation Products
Change view
Click to view available options
Chamber Material:
Epoxy-coated Aluminum
Unit Size:
Each
1 product options available for selection
Product selection table with 1 available options. Use arrow keys to navigate and Enter or Space to select.
Product Code. Chamber Material Unit Size
10765614 Epoxy-coated Aluminum Each
Use arrow keys to navigate between rows. Press Enter or Space to select a product option. 1 options available.
1 options
This item is not returnable. View return policy
Product Code. 10765614 Supplier Labconco Supplier No. 7310031
 Restricted Item
Estimated Shipment: 12-01-2027
Add to basket
Add to basket

missing translation for 'validMainframeMsg'

This item is not returnable. View return policy

Beskrivelse

The Refrigerated CentriVap Centrifugal Concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature.

  • Brushed stainless steel and glacier white, epoxy-coated steel exterior with blue accents.
  • Lid latch with safety sensor.
  • Phenol-free lid gasket.
  • Epoxy-coated aluminum chamber.
  • 1/4 hp refrigeration system to cool chamber to -4°C.
  • 300-watt heater to heat chamber to +100°C.
  • Sensor that reads internal chamber temperature.
  • Microprocessor-controlled programming for Temperature 1 from -4°C to +100°C, Temperature 1 time from 1 to 999 minutes or indefinite, Temperature 2 from -4°C to +100°C, and Temperature 2 time from 0 to 999 minutes or indefinite. Memory stores 1 to 9 programs.
  • LCD for display of program number, set point and actual Temperature 1 and 2, set point and time remaining for Temperature 1 and 2, and refrigeration activation (Y or N).
  • Control panel with RUN/STOP button, PREHEAT/ COOL button, set point SELECT button, increase/ decrease buttons, and 3 Quick-Start buttons.
  • Centrifugal motion is provided by a brushless motor capable of achieving up to 1725 rpm.
  • Quick-Stop System to stop vacuum pump, open valve to bleed air into the chamber and stop the rotor within seconds after time expires or RUN/STOP button is pressed.
  • Automatic vacuum release valve.
  • Built-in vacuum delay allows rotor to achieve speed before applying vacuum.
  • Audible alarm to signal completion of set point run time.
  • 1/2 in. OD aluminum hose fitting for connection to vacuum tubing. Vacuum pump is not included.
  • Vacuum port with quick disconnect fitting for 1/4 in. ID tubing.
  • 115 volt models have a 115 volt electrical receptacle on the back to connect accessory vacuum pump to the system.
  • 230 volt models have a reverse IEC electrical receptacle on the back to connect accessory vacuum pump to the system.
  • 115 volt models have a 10-foot, 3-wire cord with NEMA 5-20 plug.
  • 230 volt models have an 8-foot cord with NEMA 6-20 plug.
  • Overall dimensions with closed lid: 14.7 wide x 21.7 deep x 16.6 high (37.3 x 55.1 x 42.2 cm).
  • Actual weight 95 lb. (43 kg). Shipping weight 108 lb. (49 kg).

Tekniske data

Chamber Material Epoxy-coated Aluminum
Temperature Range (Metric) -4°C to +100°C
Dimensions (L x W x H) 21.7 x 14.3 x 16.6 in.
Width (English) 14.3 in.
Width (Metric) 36.3 cm
Height (English) 16.6 in.
Height (Metric) 42.2 cm
Depth (English) 21.7 in.
Depth (Metric) 55.1 cm
Weight (English) 108.0 lb.
Weight (Metric) 49.0 kg
Vis mere Vis mindre
Produkttitel
Vælg et problem

Ved at klikke på Send, anerkender du, at du kan blive kontaktet af Fisher Scientific med hensyn til den feedback, du har givet i denne formular. Vi deler ikke dine oplysninger til andre formål. Alle angivne kontaktoplysninger skal også vedligeholdes i overensstemmelse med vores Privatlivspolitik.