Tubes

Axygen Caps for PCR Tubes

8-Strip domed or flat strip caps for Axygen PCR tubes X1250 Cap Axygen thin wall, 8 per strip for PCR

Greiner Bio-One™ Hematology K3 EDTA Evacuated Tubes

Molded to be virtually unbreakable, providing a better level of safety than glass X100 VACUETTE NV EDTA K3 9ML

Axygen™ 8-Strip PCR Tubes, 0.2mL

Available in a variety of colors for easy sample identification. Axygen™ 8-Strip PCR Tubes, 0.2mL are constructed of sturdy polypropylene. Each non-sterile, conical tube features thin and consistent wall thickness. Sold with flat or domed caps to prevent sample loss or without caps. 0,2ml Thin Wall Clear PCR Strip Tubes and ClearStrip Caps, PP, VE=1250 St.

Fisherbrand™ Premium Microcentrifuge Tubes: 1.5mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling X500 Microtube Fisherbrand 1.5ml, PP, Orange, graduated, w/snap-cap, non-sterile

Fisherbrand™ Locking-Lid Microcentrifuge Tubes with Polypropylene Snap-Cap™

Convenient, pierceable locking lids snap into place with one-handed operation X500 Microtube Fisherbrand 1.5ml, PP, Assorted Colors, graduated, w/locking cap, non-sterile

Axygen™ MaxyClear Snaplock Microtubes, 2.0mL

Ensure an efficient seal that stays closed during centrifugation. Axygen™ MaxyClear Snaplock Microtubes, 2.0mL provide excellent visibility and feature a piercing port for syringe access. Available in a wide variety of colors. Maxymum Recovery™ and sterile options available. 2,0ml Boil-Proof Microtubes, Clear PP, VE=5000 St.

DWK Life Sciences Kimble™ KIMAX™ Brand Hopkins Vaccine Tubes

Used to standardize vaccines X12 Tubes Kimble centrifuge, Hopkins vaccine,

Fisherbrand™ Easy Reader™ Conical Polypropylene Centrifuge Tubes

Imprinted clear black graduations ensure accurate readings CENTRIF TUBE PP 50ML BULK S CH

Fisherbrand™ 0.2mL Flat- and Domed-Cap PCR Tubes

With integral “snap shut” cap X1000 PCR tube 0.2ml, domed cap, PP, yellowFB-0337/Y

Corning™ Centrifuge Tubes with CentriStar™ Cap

Features CentriStar™ caps with an easy-on/easy-off flat top and offers advanced ergonimics with wider knurls and roll-over edge design for easier gripping. Corning™Centrifuge Tubes with CentriStar™ Caps leak-proof design comes with a revolutionary plug feature that virtually eliminates all seepage when used undre recommended conditions. X500 Centrifuge tube PP sterile 50ml CentriStar cap max RCF 15500 25/racks

Thermo Scientific™ Nunc™ 15mL & 50mL Conical Sterile Polypropylene Centrifuge Tubes

Increase traceability of samples with one of the largest writing areas on the market when using these 15mL & 50mL conical sterile polypropylene centrifuge tubes. X500 Centrifuge tube Thermo Scientific Nunc conicaRöhrchen PP, Deckel HDPE (PU=500 pcs)

Fisherbrand™ Black Polypropylene Screw Caps for Glass Specimen Vials

Screw securely into place to seal squat or tall form glass screw neck specimen vials. Fisherbrand™ Black Polypropylene Screw Caps for Glass Specimen Vials are foil lined and available in sizes to fit a variety of tall or squat form vials. X300 Screw cap,black,polypropylene,foil lined,OD 28.2mm,ID 26.5mm,For neck bore 21.0mm vials

Fisherbrand™ Premium Microcentrifuge Tubes: 2.0mL

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling X500 Microtube Fisherbrand 2.0ml, PP, Amber, graduated, w/snap-cap, non-sterile

Gosselin™ Polypropylene 10mL Round-Base Tubes

Manufactured from polypropylene. Gosselin™ Polypropylene 10mL Round-Base Tubes stoppers are sold separately. X1000 Round base tube 10ML, PP natural H95 Ø15.4 winged plug red, sterile, SAL 10-3

Axygen™ PCR Tubes with Flat Cap, 0.2mL

Designed to fit standard 96-well blocks. Axygen™ PCR Tubes with Flat Cap, 0.2m are constructed of non-sterile polypropylene. Each conical tube features thin and consistent wall thickness. Tight-fitting cap secures contents and prevents evaporation. Available in an assortment of colors. X10000 PCR tube Axygen thin wall with flat cap

Greiner Bio-One™ Plasma Tubes with Heparin

With lithium or sodium heparin additive X50 Vacuette Plasma Litium Herapin 9ml

Thermo Scientific™ Graduated Safelock Microcentrifuge Tubes

Easily confirm your microcentrifuge tube is locked for superior security during centrifugation. X500 Microcentrifuge tubes MBP non-sterile, gradua

Falcon™ Round-Bottom Polypropylene Tubes

Manufactured from polypropylene for excellent chemical and thermal resistance. Corning™ Falcon™Round-Bottom Polypropylene Tubes are tested to withstand 3000 x g centrifugation. X1000 14mL Round Bottom PP Test Tube, without Cap, Sterile, 125/Pack

Falcon™ Round-Bottom Polystyrene Tubes

Constructed of optically clear polystyrene for easy viewing of sample. Corning™ Falcon™ Round-Bottom Polystyrene Tubes are widely used and referenced in laboratory protocols. X1000 Round BottomTest Tube, PS, 5ml, No Cap, Nons

Duran™ PBT Screw Caps

Manufactured from Polybutylene terephthalate (PBT) DURAN™ PBT Screw Caps feature GL14 thread. X10 Screw-caps with aperture, GL 18, PBT, red, aperture bore 11 mm

Greiner Bio-One™ Culture Tubes with Two-Position Vent Stoppers

Manufactured from polypropylene for excellent thermal, mechanical and chemical resistance. Greiner Bio-One™ Culture Tubes with Two-Position Vent Stoppers are ideal for storage of chemical and biological samples. two-position top allows ventilation and secure fit. X1000 TUBE 14ML VENTED PP STgraduated

Kartell™ Polypropylene Test Tubes

Supplied with fitted screw cap designed to avoid contamination resulting from drops of liquid on the inner surface. Kartell™ Polypropylene Test Tubes meet test tube needs and are suitable for centrifugation. X1000 cylindrical sterile test tubes with screw cap PP 15ml blue

Thermo Scientific™ 0.2 mL Individual Tubes

0.2 mL individual tubes with attached flat or dome snap shut caps, available in a variety of colors X1000 PCR TUBE 0,2ML DOMED PURPLE(VE=1000Stck.)

Thermo Scientific™ Nalgene™ Oak Ridge High-Speed PPCO Centrifuge Tubes

View contents of these contact-clear, Thermo Scientific™ Nalgene™ Oak Ridge High-Speed PPCO Centrifuge Tubes easily. X10 Centrifuge tubes oak ridge polypropylene 10ml

Fisherbrand™ Low-Retention Microcentrifuge Tubes

Snap-Cap™ lid provides a secure seal—even over extended periods X250 TUBE 1,5ML ST LOW RETENTION 1,5 ml natural (VE=250Stck.)

Thermo Scientific™ Nalgene™ High-Speed Polycarbonate Round Bottom Centrifuge Tubes

Repeatedly centrifugalize samples successfully thanks to the outstanding mechanical strenghth and high optical clarity of these polycarbonate round-bottom centrifuge tubes. X10 CENTRIFUGE TUBES POLYCARB. ROUND NON LIPPED

Corning™ Polypropylene Centrifuge Tubes

Manufactured from clear polypropylene for superior chemical resistance. Corning™ Polypropylene Centrifuge Tubes are an ideal solution for centrifuge needs. X500 Centrifuge tube PP sterile 50ml plug seal cap max RCF 15500 25/bags

Axygen™ Mini Tube System

Polypropylene tube system for compound library storage X600 Mini tube Axygen 8 strip, racked 100% virgin

Hirschmann Instruments™ Hematocrit Tubes

Excellent for centrifuging blood in the laboratory. Hirschmann Instruments™ Hematocrit Tubes are manufactured from disposable capillary glass. X1000 HEMATOCRITE TUBE 60µLStück)

Thermo Scientific™ Screw Cap Micro Tubes

Pure Protection: Prepare, transfer and store samples securely with Thermo Scientific Screw Cap Microtubes. Available in multiple volumes, packaging options and clean claims.

X500 MICROCENTRIFUGE TUBES MBP STERILE, FREESTANDIng screw cap & O-ring attached polypropylene

  spinner